🟡 Product Overview: M5 Brass Pan Head Phillips Screws (6–50mm Lengths)
Need a fastener that combines strength, corrosion resistance, and a classic golden look? These M5 brass pan head Phillips machine screws are a versatile choice for furniture, marine hardware, electronics, and decorative projects. The low‑profile pan head sits neatly on surfaces, while the Phillips drive makes installation quick with standard tools. Available in lengths from 6mm up to 50mm (measured under the head), you can choose exactly what your assembly requires. Solid brass construction means no rust, no magnetic interference, and a warm finish that only gets better with age. From GooBetter – reliable fasteners for everyday DIY.
✨ Why Brass M5 Pan Head Screws Are a Workshop Essential
-
Solid brass construction – Naturally corrosion‑resistant, non‑magnetic, and non‑sparking. Perfect for electrical applications, boat hardware, and outdoor furniture.
-
Phillips pan head design – Rounded top with a flat bearing surface. Distributes clamping force evenly and gives a clean, professional finish.
-
M5 metric diameter – A versatile medium size, strong enough for structural fastening yet compact enough for appliance repair and furniture assembly.
-
Lengths from 6mm to 50mm (under head) – Short screws for thin panels, longer ones for through‑hole applications. Choose from multiple options.
-
Fully threaded, metric coarse pitch (M5 x 0.8) – Threads run the entire shank length. Maximum grip in thin materials and consistent fit with standard M5 nuts.
-
Brand: GooBetter, made to high standards – Precision threads and clean heads. Reliable for everyday use.
📏 Technical Specifications – M5 Brass Pan Head Screws
| Specification |
Details |
| Brand |
GooBetter |
| Product Type |
Phillips Pan Head Machine Screws (Small Cross Round Bolts) |
| Material |
Solid brass |
| Head Style |
Pan head / Round head |
| Drive Style |
Phillips cross‑head |
| System of Measurement |
Metric |
| Thread Diameter (Screw Size) |
M5 (5mm) |
| Thread Pitch |
0.8mm (standard metric coarse) |
| Thread Type |
Fully threaded (full length from under head to tip) |
| Length Range |
6mm to 50mm (measured from underside of head – excludes head height) |
| Finish |
Natural brass (unplated) |
❓ FAQs – M5 Brass Pan Head Phillips Screws
🔸 Are these screws fully threaded? How is length measured?
Yes – they are fully threaded from just under the head to the tip. Length is measured from the underside of the head (the flat bearing surface) to the tip, not including the pan head. For example, an M5 x 20mm screw has a 20mm threaded shank below the head.
🔸 Will brass screws rust or tarnish over time?
Brass does not rust like steel. It may develop a darker patina or slight greenish tint (verdigris) over years in damp or salty environments. This is a surface change that does not weaken the screw. For indoor use, they'll stay golden for a long time. For outdoor use, they outperform plain steel but aren't as corrosion‑resistant as stainless – ideal for decorative or low‑moisture exterior work.
🔸 What Phillips screwdriver size works best for M5 brass screws?
M5 typically uses a #2 Phillips (PH2) screwdriver. A good quality PH2 bit with a sharp tip will engage well and reduce cam‑out. Brass is softer than steel, so avoid overtightening.
🔸 Can I use these screws with nuts, or are they self‑tapping?
These are machine screws – they are designed to be used with a matching M5 nut or screwed into a pre‑tapped hole. They are not self‑tapping. For best results, pair them with brass or stainless steel nuts.
🔸 Are M5 brass screws magnetic? Will they interfere with electronics?
Brass is completely non‑magnetic. That makes them perfect for sensitive electronic equipment, MRI rooms, compass housings, or any application where stray magnetism is a problem.
🔸 What lengths are available exactly?
We offer M5 lengths from 6mm up to 50mm in standard increments. Please select your desired length from the dropdown options on the product page. Common lengths include 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 30mm, 40mm, and 50mm.
