Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When you're assembling enclosures, adjusting panels, or securing covers that need frequent access, standard hex bolts slow you down and invite stripped heads. DIYers, makers, and light-industrial technicians who need fast, repeatable hand-tightening without reaching for a screwdriver will find these knurled thumb screws a practical upgrade for any workbench or project.
Each screw is machined from aluminum alloy and finished with an anodized coating that resists corrosion and surface wear. The round high-step knob head provides a wide, textured grip surface for confident finger torque. Available in M5×15mm (thread diameter 5mm / ~0.197 in, length 15mm / ~0.591 in) and M6×15mm (thread diameter 6mm / ~0.236 in, length 15mm / ~0.591 in), with 10 anodized color options and pack sizes of 1, 5, or 10 pieces.
Typical applications include 3D printer frame panels and bed leveling knobs, electronics enclosure access covers, camera rig quick-release points, and DIY CNC machine guard fastening — anywhere a knurled thumb screw hand-tightening solution replaces tool-dependent hardware.
| Material | Aluminum alloy |
|---|---|
| Finish | Anodized |
| Head Style | Round high-step knurled knob |
| Drive Style | Hand-tightened (no tool required) |
| Thread Standard | Metric |
| Thread Size Options | M5, M6 |
| Length | 15mm (~0.591 in) |
| Thread Pitch (M5) | 0.8mm (standard coarse) |
| Thread Pitch (M6) | 1.0mm (standard coarse) |
| Color Options | Wine red, Pink, Auratus, Royal blue, Sky blue, Bright black, Bright silver, Emerald green, Purple, Orange |
| Pack Quantity Options | 1 pcs, 5 pcs, 10 pcs |
| Knob Diameter | See variant options |
| Overall Height | See variant options |
Measure the inner diameter of the tapped hole in your part. An M5 hole has a nominal 5mm thread diameter (typically drilled at ~4.2mm before tapping), while an M6 hole has a 6mm thread diameter (~5.0mm drill). If you're unsure, use a thread gauge or try an M5 bolt first — it will not enter an M6 hole without wobble, and an M6 bolt will not thread into an M5 hole at all.
These use standard metric coarse pitch: M5 screws have a 0.8mm pitch and M6 screws have a 1.0mm pitch. This matches the vast majority of metric tapped holes in consumer electronics enclosures, 3D printer frames, and maker hardware. If your application requires a fine-pitch thread, please confirm before ordering.
Aluminum alloy thumb screws are designed for hand-torque applications where clamping force is moderate. They are well-suited for panel covers, access doors, and adjustment knobs. Avoid using them in high-vibration environments without a locking washer or thread-locking compound, as aluminum threads can loosen under sustained vibration more readily than steel fasteners.
Yes. Anodizing creates an aluminum oxide layer that is integral to the metal surface, providing solid resistance to oxidation and mild chemical exposure. The finish will not peel or flake under normal indoor use. For outdoor or high-humidity environments, the anodized coating offers meaningful protection, though prolonged exposure to salt spray or harsh chemicals may eventually affect the surface.
Yes — M5 and M6 coarse-pitch threads are fully compatible with standard metric hex nuts, flange nuts, T-nuts, and threaded inserts of the same size and pitch. They will also thread into standard metric tapped holes in aluminum extrusions (e.g., 2020/2040 V-slot profiles use M5 T-nuts), steel plates, and plastic panels with heat-set inserts.
All 10 anodized colors are available at the same price within each size and quantity tier. Color choice is purely aesthetic — use a single color for a clean look, or assign different colors to different access points on your build for quick visual identification. Select your preferred color from the variant dropdown above before adding to cart.
The 1-piece option is ideal for a single replacement or testing fit before committing to a larger order. The 5-piece pack suits small enclosures or panels with 4–5 fastening points. The 10-piece pack is cost-effective for larger builds, stocking a parts drawer, or projects that use the same screw size across multiple assemblies.
