Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When you need to make quick, repeated adjustments without reaching for a screwdriver, standard hex bolts slow you down. M6 knurled thumb screws are the go-to solution for makers, engineers, and DIY enthusiasts who need secure, hand-tightened fastening on panels, enclosures, jigs, and equipment covers. The knurled grip lets you apply firm torque with bare fingers, even in tight spaces where tools cannot reach.
Each screw is machined from aluminium alloy with a stainless steel threaded mandrel, finished with an anodic oxidation coating for a smooth, durable surface. The M6 thread diameter is consistent across all lengths, which range from 6 mm (approximately 0.24 in) to 40 mm (approximately 1.57 in). The flat, round knurled head provides a wide contact surface for comfortable grip.
These M6 aluminium thumb screws suit a wide range of applications: securing 3D printer bed leveling knobs, adjusting CNC machine guards, fastening rack-mount equipment panels, and assembling DIY electronics enclosures. Available in 10 anodized colors — including black, silver, royal blue, and golden — they also serve as color-coded fasteners for quick visual identification in multi-component assemblies.
The round knurled head provides a textured surface for firm finger torque — no tools required for installation or removal.
The threaded shaft is stainless steel for corrosion resistance and thread durability, while the aluminium body keeps weight low.
Choose from Royal Blue, Green, Golden, Dark Red, Black, Silver, Purple, Rose Red, Sky Blue, or Orange for color-coded assemblies.
Select the exact grip length you need — from 6 mm (0.24 in) to 40 mm (1.57 in) — to match your panel thickness and clamping depth.
The anodized surface resists scratching and light corrosion, maintaining a clean appearance in workshop and indoor environments.
Available in 1-piece or 4-piece packs so you can order exactly what your project requires without overstocking.
| Thread Size | M6 (6 mm metric) |
|---|---|
| Thread Type | Metric coarse (standard M6 pitch) |
| Screw Length (excluding head) | 6 mm – 40 mm (0.24 in – 1.57 in) |
| Head Style | Flat round knurled |
| Drive Style | Thumb / hand-tightened (no tool drive) |
| End Type | Open (through-thread) |
| Body Material | Aluminium alloy |
| Mandrel Material | Stainless steel |
| Surface Finish | Anodic oxidation (anodized) |
| Head Diameter | See variant options |
| Head Height | See variant options |
| Available Colors | Royal Blue, Green, Golden, Dark Red, Black, Silver, Purple, Rose Red, Sky Blue, Orange |
| Pack Quantity | 1 Pcs or 4 Pcs |
| System of Measurement | Metric |
Measure the total thickness of the material(s) you need to clamp or fasten. The screw length (excluding head) should be equal to or slightly longer than that thickness so the thread engages fully in the receiving nut or insert. For example, if your panel is 10 mm thick and you are threading into a 5 mm insert, choose M6 × 15 mm or M6 × 18 mm to ensure full thread engagement.
These screws are designed for hand-tightened, non-structural applications such as panel covers, access doors, jig fixtures, and equipment enclosures. The aluminium alloy body provides adequate clamping force for light-to-medium duty use. They are not intended to replace high-torque structural bolts in load-bearing joints.
The anodic oxidation coating on the aluminium body provides good resistance to light corrosion and surface oxidation in dry or indoor environments. The stainless steel mandrel adds further corrosion resistance at the threaded section. These screws are not recommended for prolonged outdoor exposure or immersion in liquids without additional protection.
Yes. The M6 metric thread is a globally standardized size and is compatible with standard M6 hex nuts, wing nuts, threaded inserts, and tapped holes machined to M6 specifications. Always confirm the thread pitch of your receiving component matches standard M6 coarse pitch (1.0 mm) before ordering.
Yes. M6 knurled thumb screws are widely used for 3D printer bed leveling, CNC machine guard adjustments, and router table fence positioning. The hand-tightened design allows fast, tool-free adjustments during calibration. Select a length that matches your spring or spacer stack height for bed leveling applications.
If you need a single replacement fastener or are testing a size before committing, the 1-piece option is ideal. The 4-piece pack is suited for applications requiring multiple fasteners of the same size and color — such as securing all four corners of a panel or enclosure lid. The per-unit cost is lower in the 4-piece pack.
No. All color variants are made from the same aluminium alloy body with a stainless steel mandrel. The 10 anodized colors are purely aesthetic and are useful for color-coding fasteners in multi-component assemblies for quick visual identification. Mechanical properties are identical across all colors.
