Plastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPT
Plastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPT
Plastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPT
Plastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPT
Plastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPT
Plastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPT
Roll over image to zoom in Click on image to zoom
Plastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPTPlastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPTPlastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPTPlastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPTPlastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPTPlastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPT

Plastic Male Thread Barbed 90° Elbow Hose Fitting — 1/8" to 3/4" NPT

HomeDIYer
No reviews

By HomeDIYer®

Price:
$2.67 USD
Stock:
In stock (500 units), ready to be shipped

Payment & Security

Ach Direct Debit Amazon American Express Apple Pay Bancontact Diners Club Discover Google Pay iDEAL Wero Mastercard PayPal Shop Pay USDC Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Quantity Discount Promotion
🎯 BULK DISCOUNT: Buy More, Save More!
Buy 2 Items
5% OFF
Buy 4 Items
10% OFF
Buy 6 Items
15% OFF
✅ Auto-discount • 🔄 Mix & match
Expert

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM
WhatsApp WhatsApp Email
⚡
24-Hour Fast Ship
🚚
Arrives in 3-14 days
🌍
Global Reach
↩️
30-Day Returns
🌱 1 tree planted with every purchase

Description

Barbed 90° Elbow Hose Fittings with Male Thread — Reliable Right-Angle Connections for DIY Plumbing & Irrigation

Routing a hose around a corner without kinking it is one of the most frustrating challenges in DIY plumbing, irrigation, and aquarium builds. Whether you're assembling a drip irrigation manifold, connecting a pump in a tight cabinet, or routing tubing through a garden bed, a sharp bend in flexible hose can restrict flow and cause premature failure. These plastic male thread barbed 90-degree elbow hose fittings solve that problem with a clean, right-angle turn built directly into the connector.

Each fitting features a male NPT threaded end and a single barbed hose tail set at a 90° angle. Thread sizes range from 1/8" NPT to 3/4" NPT, and barb diameters span 6.4mm (1/4") to 19.5mm (approximately 3/4"), covering the most common flexible tubing sizes used in residential and light commercial applications. Available in quantities from 1 to 25 pieces per order to suit both single repairs and larger project runs.

These right-angle hose connectors are well suited for drip irrigation systems, aquarium and pond pump plumbing, hydroponics tubing layouts, RV water line routing, and compact DIY fluid transfer setups where space constraints make straight fittings impractical.

🔗Compatibility: Male NPT threads (US standard). Fits flexible vinyl, silicone, polyurethane, and soft rubber hose. Match barb OD to your hose inner diameter for a secure seal. Use PTFE thread tape on male threads before installation.

✅ Key Features of These Barbed 90° Elbow Hose Fittings

  • 📐True 90° Elbow Design — The right-angle barb-to-thread geometry eliminates hose kinking in tight spaces, maintaining consistent flow in compact plumbing and irrigation layouts.
  • 🔩Male NPT Threaded Entry — Standard US NPT taper thread screws directly into female-threaded ports on pumps, valves, and manifolds without adapters, simplifying installation in drip irrigation and hydroponics systems.
  • 📏Wide Size Range — Thread sizes from 1/8" to 3/4" NPT paired with barb diameters from 6.4mm (≈1/4") to 19.5mm (≈3/4") cover the most common flexible tubing sizes used in residential DIY plumbing and garden watering systems.
  • 💧Barbed Grip for Leak Resistance — The ribbed barb profile grips the inside of flexible hose tubing to resist pull-out and reduce drip risk in low-to-medium pressure fluid transfer applications.
  • ⚖️Lightweight Plastic Construction — Corrosion-resistant plastic body is suitable for fresh water, mild chemical solutions, and outdoor irrigation environments where metal fittings would add unnecessary weight or corrode over time.
  • 📦Flexible Quantity Options — Order from 1 to 25 pieces per size to match your project scope, whether you need a single replacement fitting or a full set for a multi-zone irrigation or aquarium plumbing build.

📐 Technical Specifications — Barbed 90° Elbow Hose Fittings

Fitting Type Male Thread Barbed 90° Elbow
Thread Standard NPT (National Pipe Taper) — US Standard
Thread Sizes Available 1/8", 1/4", 3/8", 1/2", 3/4" NPT
Barb Diameters Available 6.4mm (≈1/4"), 7.9mm (≈5/16"), 9.5mm (≈3/8"), 11.1mm (≈7/16"), 12.7mm (1/2"), 14.2mm (≈9/16"), 15.8mm (≈5/8"), 17.5mm (≈11/16"), 19.5mm (≈3/4")
Elbow Angle 90°
Material Plastic (corrosion-resistant)
Compatible Hose Types Flexible vinyl, silicone, polyurethane, soft rubber tubing
Recommended Pressure Range Typically suitable for low-to-medium pressure; contact us to confirm
Thread Sealant Required Yes — PTFE thread tape recommended
Quantity per Order 1, 2, 5, 10, 20, or 25 pcs (select above)
Hose Clamp Recommended Yes, for pressurized applications
Country of Origin See variant options
⚠️Size Note: The thread size and barb size are two separate dimensions. Confirm both your port thread size and your hose inner diameter before ordering. When in doubt, measure your hose ID with calipers.

❓ Frequently Asked Questions

How do I choose the right size barbed 90-degree elbow fitting?

Match the male thread size (e.g., 1/4" NPT) to your pipe or manifold port, and match the barb diameter to your hose inner diameter. For example, a 1/4" x 6.4mm fitting suits a 1/4" NPT port with 1/4" ID tubing. When in doubt, measure your hose ID with calipers before ordering.

What pressure can these plastic elbow hose fittings handle?

Plastic barbed fittings of this type are generally rated for low-to-medium pressure applications, typically up to 60–80 PSI depending on the material and hose type. For high-pressure systems, please contact us to confirm suitability.

Can these fittings be used outdoors or in wet environments?

Yes. Plastic fittings are generally resistant to moisture and mild corrosion, making them suitable for outdoor irrigation, garden watering systems, and aquarium setups. They are not recommended for prolonged direct UV exposure without additional protection.

Are these fittings compatible with NPT threads?

These fittings feature male NPT (National Pipe Taper) threads, which are the standard in the US. They are compatible with NPT female-threaded ports on pumps, valves, manifolds, and fittings. Use PTFE thread tape for a leak-free seal.

What types of hose or tubing work with barbed fittings?

Barbed fittings work best with flexible tubing such as vinyl, silicone, polyurethane, and soft rubber hose. The hose inner diameter should match the barb diameter for a secure, leak-resistant connection. A hose clamp is recommended for pressurized applications.

Do I need thread sealant with these fittings?

Yes, applying PTFE (Teflon) thread tape to the male threads before installation is strongly recommended. This ensures a watertight seal and prevents thread galling on plastic fittings. Wrap the tape clockwise 2–3 times before threading in.

What is the difference between the thread size and the barb size?

The thread size (e.g., 1/4", 3/8") refers to the male NPT thread that screws into a port or fitting. The barb size (e.g., 6.4mm, 9.5mm) refers to the outer diameter of the barb that the hose slides onto. Both dimensions must match your system for a proper fit.

🛒 Select your size and quantity above, then add to cart — ships from our US warehouse.

You may also like

Recently viewed