Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When you need to make frequent, tool-free adjustments on a 3D printer bed, camera rig, woodworking jig, or access panel, standard hex bolts slow you down. Tiny knobs are hard to grip, and metal hardware gets cold in winter and hot near motors. These six-petal flower rose head thumb screws solve that problem for makers, machinists, and DIY builders who need reliable hand-tightened fasteners every day.
Each screw consists of a 38mm diameter (approx. 1.50 in) black plastic six-petal knob head bonded to a zinc-plated carbon steel threaded stud. Thread diameters available are M6 (pitch 1.0 mm), M8 (pitch 1.25 mm), and M10 (pitch 1.5 mm). Stud lengths range from 12 mm to 100 mm (approx. 0.47 in to 3.94 in) depending on the variant selected — see the dropdown for exact combinations.
Typical applications include 3D printer bed-leveling knobs for tool-free calibration, quick-release access panel fasteners on industrial machinery, adjustable fence clamps on woodworking jigs, camera rig rail locks, and fitness equipment adjustment pins. The non-conductive plastic head also makes these suitable for electrical enclosure covers where accidental contact is a concern.
The flower rose head design distributes finger pressure across six lobes, giving you firm grip and high torque without tools — even with gloves on.
Large-diameter knob (approx. 38 mm / 1.50 in) made from black engineering plastic. Non-conductive, non-heat-conducting, and scratch-resistant on mating surfaces.
Carbon steel threaded stud with zinc plating for corrosion resistance. Fully threaded on shorter lengths; partially threaded on longer variants. Holds securely under repeated hand-tightening cycles.
Three thread diameters and stud lengths from 12 mm to 100 mm cover light to heavy adjustment applications. Order the exact size you need from the variant selector.
Designed for frequent hand tightening and loosening — ideal for quick-release panels, adjustable fixtures, and any setup where speed and convenience matter.
Available in 1, 2, 5, 10, or 20-piece packs. Order a single piece to test fit, or stock up in bulk for production or workshop use.
| Head Style | Six-petal flower rose head |
|---|---|
| Head Diameter | Approx. 38 mm (1.50 in) |
| Head Material | Black engineering plastic (PA/ABS type) |
| Stud Material | Carbon steel, zinc-plated |
| Color | Black head / silver stud |
| Thread Standard | Metric coarse thread (ISO) |
| Available Thread Diameters | M6, M8, M10 |
| Thread Pitch — M6 | 1.0 mm |
| Thread Pitch — M8 | 1.25 mm |
| Thread Pitch — M10 | 1.5 mm |
| Stud Length Range | 12 mm – 100 mm (see variant options) |
| Thread Type | Fully threaded (short lengths); partially threaded (longer lengths) |
| Corrosion Resistance | Moderate — zinc plating, suitable for indoor and light outdoor use |
| Packing Quantity | 1 / 2 / 5 / 10 / 20 pcs (see variant options) |
Match the thread diameter to your tapped hole or nut. M6 is the smallest and lightest, suitable for 3D printer beds, camera accessories, and light fixtures. M8 handles medium loads such as woodworking jigs and machinery guards. M10 is for heavier applications like industrial access panels and structural adjustments. When in doubt, measure the inner diameter of your existing hole or check the bolt that currently fits it.
Stud length is measured from the underside of the plastic head to the tip of the threaded shaft. Add the thickness of all materials being clamped plus at least 3–5 full thread engagements in the nut or tapped hole. For example, clamping a 10 mm panel into a 10 mm deep tapped hole requires at least a 20 mm stud length.
Yes. The zinc-plated carbon steel stud provides solid mechanical strength for hand-tightened applications. The plastic head is bonded or molded onto the stud and withstands normal hand-tightening torque. These are not designed for high-torque power tool use — they are intended for tool-free, hand-operated adjustments.
Zinc plating provides moderate corrosion resistance, making these screws suitable for indoor environments and occasional light outdoor exposure. For continuous outdoor, marine, or high-humidity applications, stainless steel thumb screws would be a better choice. The black plastic head itself is weather-resistant.
Yes. Simply pair with a standard ISO metric nut of the same thread size — M6, M8, or M10. This is common when clamping panels or brackets where a tapped hole is not available. A washer under the nut is recommended to protect the mating surface.
The plastic head is non-conductive and safe for manual contact near electrical equipment. However, the steel stud is conductive — ensure it does not contact live conductors. These are commonly used on electrical panel covers and junction box lids where the stud threads into an insulated or grounded housing.
Shorter stud lengths (typically up to 30–40 mm) are fully threaded from head to tip, maximizing thread engagement in shallow holes. Longer studs may have a smooth shank section near the head with threads only at the end — this is standard for longer metric fasteners. Check the product images for the specific variant you select.
