M2.5–M6 Socket Half Round Head Screws – Carbon Steel, Hex Drive, Fully Threaded (5–60mm Lengths) $0.00 USD

M2.5–M6 Socket Half Round Head Screws – Carbon Steel, Hex Drive, Fully Threaded (5–60mm Lengths)

Name: M2.5–M6 Socket Half Round Head Screws – Carbon Steel, Hex Drive, Fully Threaded (5–60mm Lengths)
Brand: HomeDIYer
SKU: GLFBQYF2024JINGLONGWJ2558x1
Availability: InStock

$0.00 USD

In stock

By HomeDIYer^®

Quantity Discount Promotion

QTY（pcs）:

Variant

Quantity:

Pickup currently unavailable at Illinois

Illinois

Pickup currently unavailable

150 Hastings Drive
Buffalo Grove IL 60089
United States

+18479091828

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

🔩 M2.5–M6 Socket Half Round Head Screws – Carbon Steel, Hex Drive, Fully Threaded (5–60mm Lengths)

You’re assembling a compact electronic device, fitting automotive trim, or repairing a piece of delicate hardware – and you need a screw with a clean, low‑profile head and a strong hex drive. These M2.5 to M6 socket half round head screws (sometimes called button head socket caps) give you the best of both: a rounded top that looks finished and a deep hex socket that lets you torque them down without slipping. Made from durable carbon steel with a zinc or other plating for corrosion resistance, they’re strong enough for everyday use. Fully threaded, with lengths from 5mm up to 60mm (measured under the head). Perfect for electronics, precision instruments, consumer appliances, and automotive interior work where a compact, reliable fastener is needed.

✨ Key Features – Socket Half Round Head Machine Screws

🔘 Half round (button) head design – Slightly rounded top with a flat underside. Provides a finished look while ensuring secure clamping force.
🔧 Hex socket (Allen) drive – Allows high torque without cam‑out. Clean, recessed drive won’t collect dirt.
💪 Carbon steel construction – High strength and load‑bearing capability. Zinc or other plating adds corrosion resistance.
📏 Metric sizes M2.5, M3, M4, M5, M6 – Small diameters ideal for compact assemblies in electronics, automotive trim, and delicate hardware.
📐 Lengths from 5mm to 60mm (under head) – Fully threaded. Available in 5, 6, 8, 10, 12mm, and up to 60mm.
🔩 Widely used – Electronics, automotive trim, precision instruments, consumer appliances, and small machinery.

📏 Available Sizes – M2.5 to M6 Socket Half Round Head Screws (Length Under Head)

Thread Diameter	Thread Pitch (mm)	Typical Lengths (mm, under head) *	Head Style	Drive	Material
📐 Length measured from underside of head to tip. Fully threaded. Select exact size from dropdown.
M2.5	0.45	5, 6, 8, 10, 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60 (exact availability varies by diameter)	Half round (button) head	Hex socket (Allen)	Carbon steel / Zinc plated
M3	0.5
M4	0.7
M5	0.8
M6	1.0

* Lengths are typical – exact availability may vary. Please allow minor manual measurement errors. Hex key sizes: M2.5→2mm, M3→2.5mm, M4→3mm, M5→4mm, M6→5mm approx.

📋 Why Choose Socket Half Round Head Screws?

Feature	Benefit
Low profile button head	Rounded top looks clean and professional. Sits close to the surface without protruding – ideal for tight spaces.
Hex socket drive	No cam‑out. You can apply higher torque than with Phillips or slotted drives, perfect for power tools.
Fully threaded	Maximum grip in blind holes or when using nuts – no weak unthreaded shank.
Zinc plated carbon steel	Affordable, strong, and moderately corrosion resistant for indoor and light outdoor use.

❓ Frequently Asked Questions – Socket Half Round Head Screws

1. How do I measure the length of a half round (button) head screw?

For button head screws, length is measured from the underside of the head (the flat bearing surface) to the tip. The head itself is NOT included. So an “M4 x 10mm” screw has a 10mm long threaded shaft under the head. This matches our listing.

2. Are these screws fully threaded?

Yes – all M2.5 to M6 screws in this range (up to 60mm length) are fully threaded from under the head to the tip, giving you maximum grip in shallow holes or when using nuts.

3. What’s the difference between a half round head and a standard socket cap head?

A half round (button) head has a lower, more rounded profile than a standard socket cap head. It protrudes less and looks cleaner, but it also has a smaller hex socket and is not designed for extremely high torque. Ideal for applications where head height is limited.

4. Will the zinc plating rust? Can I use these screws outdoors?

Zinc plating provides moderate corrosion resistance – fine for indoor use and occasional light outdoor exposure (e.g., covered patio or garage). For continuous outdoor, marine, or high‑humidity environments, we recommend stainless steel screws. For most electronics, automotive interior, and appliances, zinc‑plated carbon steel is perfectly adequate.

5. What hex key size do I need for each screw?

Approximate matching: M2.5 uses 2mm, M3 uses 2.5mm, M4 uses 3mm, M5 uses 4mm, M6 uses 5mm Allen key. Always use a quality hex key that fits snugly to avoid rounding the socket.

6. Can I use these screws with a nut? What size nut fits?

Yes – these are machine screws. Use standard metric nuts of the same thread size and pitch (e.g., M4 nut for M4 screw). They will also thread into pre‑tapped holes. Not self‑tapping – for wood or plastic, use a threaded insert or a nut on the back.