Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Exposed screw heads on mirrors, glass shelves, and signboards look unfinished — these decorative stainless steel cover caps snap over the screw head in seconds, turning an eyesore into a clean design accent. Built for DIYers, interior designers, and commercial installers who want hardware that looks as good as the surface it holds.
Each cap is machined from solid stainless steel in two distinct styles: a flat disc plate (16–40mm, approx. ⅝–1⅝ in) for a flush, low-profile look, and a ball-shaped dome cap (20–50mm, approx. ¾–2 in) for a rounded decorative accent. Available in Silver, Gold, Black, Rose-Gold, Bright Silver, and Bright Gold finishes. Packing options: 1, 4, 12, or 20 pcs per order.
Use them on bathroom mirrors, glass splashbacks, retail signage, wardrobe doors, tea tables, display racks, and any exposed fastener that needs a professional finish. The stainless steel construction resists rust, humidity, and daily wear — no maintenance required.
Cover exposed mirror screw heads on bathroom mirrors, glass splashbacks, and frameless glass panels. The flat disc plate sits flush against the glass surface for a clean, professional finish.
Finish signboards, display racks, and company name plates with matching gold or black caps. Turns functional fasteners into deliberate design details on high-visibility surfaces.
Cap exposed bolt heads on tea tables, wardrobe doors, and cabinet hardware. The ball-shaped dome style adds a decorative knob-like accent on light-duty furniture pieces.
Replace cracked plastic screw covers on existing mirrors or shelves, or upgrade bare metal screw heads to a polished finish that matches your bathroom or kitchen hardware.
| Product Type | Decorative mirror screw cover cap / stainless steel disc plate cap |
|---|---|
| Material | Solid stainless steel (rust-resistant, tarnish-resistant) |
| Head Styles | Flat disc plate (flush mount) / Ball-shaped dome cap (rounded) |
| Flat Disc Sizes | 16mm, 19mm, 22mm, 25mm, 30mm, 40mm (approx. ⅝–1⅝ in) |
| Ball-Shaped Sizes | 20mm, 25mm, 30mm, 40mm, 50mm (approx. ¾–2 in) |
| Color / Finish Options | Silver, Gold, Black, Rose-Gold, Bright Silver, Bright Gold |
| Packing Options | 1 PCS, 4 PCS, 12 PCS, 20 PCS (select variant) |
| Installation | Snap-on over installed screw head — no tools or adhesive required |
| Compatibility | Standard mirror screws and decorative bolts (screw not included) |
| Typical Applications | Bathroom mirrors, glass splashbacks, signboards, display racks, wardrobe doors, tea tables, furniture hardware |
These are cover caps — they snap or press over the head of an already-installed mirror screw. First, install the mirror screw into the wall or bracket as normal. Then press the stainless steel cap onto the screw head until it seats flush against the surface. No glue or tools needed. The cap hides the screw head completely and can be removed later if you need to access the screw.
Measure the outer diameter of the screw head (not the thread shaft). The cap should be slightly larger than the screw head to fully cover it and overlap onto the surface. For example, if your screw head is approximately 15mm wide, a 16mm cap is typically the right fit. For most standard residential mirror screws, 19mm or 22mm flat disc caps are the most common choice. If you're unsure, order a single cap in your estimated size to test fit before buying a larger pack.
The flat disc plate sits completely flush against the surface — ideal for glass mirrors, splashbacks, and any application where a low-profile, minimal look is preferred. The ball-shaped dome cap has a rounded top that protrudes slightly from the surface, adding a decorative knob-like accent. Ball-shaped caps are popular for furniture, lamp fixtures, and display racks where a more decorative finish is desired. Both styles snap onto standard mirror screws.
Yes — stainless steel is highly resistant to moisture and humidity. Unlike brass or iron hardware, these caps will not develop rust rings or green tarnish around your mirror. They are well-suited for bathrooms, kitchens, and covered outdoor areas. Simply wipe clean with a damp cloth occasionally — no special maintenance or sealing is required.
The colored finishes are applied to the stainless steel base using a durable coating process. With normal indoor use, the finish typically lasts for years without noticeable fading. Prolonged exposure to direct sunlight or frequent cleaning with harsh chemical cleaners may cause some gradual lightening over time. For the most durable long-term option in high-exposure environments, natural silver stainless steel is the most resilient choice.
Yes — these caps work on any surface where a screw head is visible and needs a decorative cover. Common applications include glass shelves, wooden cabinets, retail signboards, display cases, wardrobe doors, tea tables, and boutique furniture. The flat disc plate sits flush against glass, wood, or metal surfaces. Ensure the underlying screw is securely installed before attaching the cap.
No — these are cover caps only. The mirror screws or decorative bolts are not included. These caps are designed to fit over standard mirror screws that you already have installed or purchase separately. If you need mirror screws, search for "mirror fixing screws" or "decorative mirror bolts" to find compatible hardware.
