Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Cold drafts under doors, noise bleeding between rooms, and door-frame collision damage are persistent household problems that standard foam tape fails to solve long-term. This self-adhesive door weather stripping is built for homeowners and DIYers who need a durable, thickened seal that stays bonded and maintains its shape through repeated door use.
Constructed from silicone rubber with a thickened hard PVC backing, each strip measures 1 meter (39.4 in.) in length and weighs 148 g (5.2 oz). The reinforced self-adhesive backing bonds to door frames, window frames, and cabinet edges without distortion. Available in four colors — White, Gray & White, Black, and Brown — to match common interior and exterior door finishes.
Suited for interior door draft sealing, bedroom and home office soundproofing weatherstrip applications, anti-collision door edge protection, and window gap sealing in residential DIY weatherproofing projects.
Seal gaps around exterior and interior doors to reduce cold air infiltration in winter and heat gain in summer — a straightforward DIY weatherproofing upgrade.
Apply to door frames to reduce noise bleed between rooms — effective for light sleepers, remote workers, and anyone needing a quieter interior environment.
Fits window frame edges to block drafts and reduce rattling on older or single-pane windows without requiring frame replacement.
Cushions door-to-frame impact on closing — reduces noise and protects painted or varnished door frames from chipping and wear over time.
| Material | Silicone Rubber with hard PVC backing |
|---|---|
| Adhesive Type | Self-adhesive (reinforced back adhesive) |
| Length per Strip | 1 m (39.4 in.) |
| Weight per Strip | 148 g (5.2 oz) |
| Available Colors | White; Gray & White; Black; Brown |
| Profile Type | Thickened door frame / bottom seal |
| Application | Door frames, window frames, cabinet edges, sliding door tracks |
| Compatible Surfaces | Wood, aluminum, uPVC, painted surfaces |
| Trimmable | Yes — cut to length with scissors or utility knife |
| Installation | Peel-and-stick, no tools required |
Each strip is 1 meter (39.4 in.) long. It can be trimmed to any shorter length using scissors or a utility knife. For longer door frames, multiple strips can be applied end-to-end.
The reinforced self-adhesive backing bonds to wood, aluminum, uPVC, and painted surfaces. For best adhesion, clean the surface with a dry cloth to remove dust and grease before applying. Avoid applying to wet or freshly painted surfaces.
The silicone rubber material is moisture-resistant and suitable for use on exterior door frames. For high-exposure exterior applications, press the strip firmly during installation and allow 24 hours for the adhesive to fully cure before exposure to moisture.
Yes — the thickened profile fills frame gaps that allow sound to pass through, providing a degree of noise reduction. It is effective for reducing everyday sound bleed between rooms but is not a specialist acoustic seal.
This strip uses a silicone rubber sealing profile (the part that contacts the door) with a hard PVC backing layer that carries the adhesive. The silicone rubber compresses on door contact and returns to shape, while the hard PVC backing keeps the strip flat and bonded to the frame surface.
The strip can be removed by peeling it away slowly at a low angle. On painted or delicate surfaces, peel carefully to minimize the risk of paint lifting. Any adhesive residue can typically be removed with isopropyl alcohol or an adhesive remover.
A standard interior door frame has three sides — two vertical sides (typically 80 in. / 203 cm each) and one horizontal top (typically 36 in. / 91 cm). You would need approximately 5–6 strips of 1 m each to seal all three sides. Contact us to confirm for a specific door size.
