Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts
Roll over image to zoom in Click on image to zoom
Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing BeltsTiming Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts

Timing Belt Pulley 3M 12T - 60T Synchronous Wheel for width 10 mm Timing Belts

HomeDIYer
No reviews

By HomeDIYer®

Price:
$10.80 USD
Stock:
In stock (500 units), ready to be shipped

Payment & Security

Ach Direct Debit Amazon American Express Apple Pay Bancontact BLIK Diners Club Discover EPS Google Pay iDEAL Wero JCB Maestro Mastercard Multibanco MobilePay PayPal Przelewy24 Shop Pay Twint Union Pay USDC Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Limited Offer — Spend More, Save More
Spend $55+
Save $5
Spend $100+
Save $10
Spend $200+
Save $25
✅ Discount applied automatically at checkout 🚚 Free shipping on orders over $89
HomeDIYer DIY Expert Support

DIY Expert Support

Get fitment advice & recommendations

Mon–Fri  8:30 AM – 8:00 PM
WhatsApp
24-Hour Fast Ship
Arrives in 3–14 Days
Worldwide Shipping
30-Day Returns
1 tree planted with every purchase

Description

3M Timing Belt Pulley 12T–60T — Reliable Synchronous Drive for DIY Automation

When your CNC router skips steps, your 3D printer loses position, or your conveyor drifts out of sync, the culprit is often a worn or mismatched pulley. Makers, hobbyists, and small-workshop engineers who demand repeatable, slip-free motion need a 3M timing belt pulley they can trust across long production runs.

These 3M timing belt pulleys are machined from aluminum alloy with an arc-round tooth profile and a 3.0 mm pitch. The slot width is 11 mm, matching standard 10 mm wide 3M timing belts with side flanges. Bore options range from 4 mm to 20 mm (approximately 0.16 in to 0.79 in), and tooth counts span 12T through 60T to cover a wide range of speed-ratio requirements.

Typical use cases include CNC router X/Y axis drives, desktop 3D printer extruder and motion systems, small conveyor belt assemblies, and DIY robotic arm joints — anywhere a 3M synchronous belt pulley with a precise bore fit is needed for low-backlash power transmission.

✅ Compatibility: Designed for standard 3M pitch timing belts with 10 mm width. Slot width 11 mm accommodates belt flanges. Verify bore diameter matches your shaft before ordering.

✅ Key Features of These 3M Timing Belt Pulleys

⚙️ 3.0 mm Pitch, Arc-Round Tooth Profile

Matches standard 3M timing belts for smooth, low-noise engagement and consistent tooth meshing under load.

🔩 Wide Bore Range: 4 mm – 20 mm

Covers the most common shaft diameters used in CNC machines, 3D printers, and DIY automation rigs — from 4 mm stepper shafts to 20 mm motor shafts.

🏗️ Aluminum Alloy Construction

Lightweight yet rigid aluminum alloy body reduces rotational inertia while maintaining dimensional stability across operating temperatures.

📐 12T to 60T Tooth Count Selection

Choose from 25 tooth-count options to dial in your exact speed ratio — from high-speed 12T drive pulleys to large 60T driven pulleys for torque multiplication.

📏 11 mm Slot Width for 10 mm Belts

The 11 mm slot width provides the correct clearance for 10 mm wide 3M timing belts, keeping the belt centered and preventing edge wear.

🔄 Synchronous, Slip-Free Drive

Positive tooth engagement eliminates the slip and stretch associated with V-belts, delivering accurate position control for CNC and 3D printing applications.

📐 Technical Specifications — 3M Timing Belt Pulley

Belt Type 3M (3.0 mm pitch)
Tooth Profile Arc Round
Tooth Count 12T, 14T, 15T, 16T, 17T, 18T, 19T, 20T, 22T, 24T, 25T, 26T, 28T, 30T, 32T, 35T, 36T, 38T, 40T, 44T, 45T, 48T, 50T, 55T, 60T
Slot Width 11 mm
Compatible Belt Width 10 mm
Bore Diameter 4 mm – 20 mm (see variant options)
Material Aluminum Alloy
Outer Diameter See variant options
Hub Style See variant options
Finish Natural aluminum (uncoated)
Quantity 1 piece per order

❓ Frequently Asked Questions

How do I choose the right tooth count for my application?

The tooth count determines your speed ratio. Divide the driven pulley teeth by the drive pulley teeth to get the reduction ratio. For example, a 12T drive and a 60T driven pulley gives a 5:1 reduction — five motor rotations per one output rotation. For CNC and 3D printer motion axes, matched tooth counts (1:1) are common; for extruder drives, a reduction ratio is typical.

Which bore size should I select for my stepper motor shaft?

Most NEMA 17 stepper motors use a 5 mm shaft; NEMA 23 motors commonly use 6.35 mm (1/4 in) or 8 mm shafts. Measure your shaft diameter with calipers before ordering. Available bores include 4, 5, 6, 6.35, 7, 8, 10, 11, 12, 12.7, 14, 15, 16, 17, 19, and 20 mm — select the one that matches your shaft exactly.

Are these pulleys compatible with standard 3M timing belts?

Yes. These pulleys are designed for 3M pitch timing belts (3.0 mm tooth pitch, arc-round profile) with a 10 mm belt width. The 11 mm slot width accommodates the belt with proper side clearance. They are not compatible with GT2, HTD, or other pitch standards.

How strong are aluminum alloy pulleys compared to steel?

Aluminum alloy pulleys offer a good strength-to-weight ratio suitable for most DIY CNC, 3D printing, and light automation loads. They are significantly lighter than steel, which reduces rotational inertia and improves acceleration response. For very high torque or heavy industrial loads, contact us to confirm suitability before ordering.

Do these pulleys resist corrosion?

Aluminum alloy naturally forms a thin oxide layer that provides moderate corrosion resistance in typical indoor environments. For humid or outdoor applications, consider applying a light coating of machine oil or anodizing the pulley after purchase. The natural aluminum finish is uncoated as supplied.

Can I use these pulleys with a 10 mm wide GT2 belt?

No. GT2 and 3M are different tooth profiles and pitches. GT2 has a 2 mm pitch with a different tooth geometry, while 3M has a 3 mm pitch with an arc-round profile. Mixing belt and pulley standards will cause poor meshing, noise, and premature wear. Always match the belt pitch and profile to the pulley specification.

Is a set screw or keyway included to secure the pulley to the shaft?

Fastening hardware varies by model. Please check the variant detail or contact us to confirm whether a set screw, keyway, or other retention feature is included for your selected bore size. If not included, standard metric set screws are widely available at hardware suppliers.

🛒 Select your Model (tooth count) and Bore above, then add to cart.

You may also like

Recently viewed