Wire Reinforced Clear Braided PVC Hose — Flexible, Kink-Resistant Pipe for Water, Air & Fuel
If you've ever dealt with a kinked garden hose, a collapsed pump inlet line, or a plain PVC tube that burst under pressure, you know how frustrating the wrong hose can be. This wire reinforced clear braided PVC hose is built for DIYers, hobbyists, and tradespeople who need a reliable, flexible hose that holds its shape under pressure and suction alike — without the bulk of rigid pipe.
Each length is cut from a continuous run of clear, flexible PVC with an embedded wire braid reinforcement layer. Available in eight Inner Diameter (ID) sizes from 10mm (≈3/8") to 38mm (≈1-1/2"), with Outer Diameters ranging from 15mm to 45mm — wall thickness is consistently approximately 5mm across sizes. Choose from 1 Metre (≈3.3 ft), 2 Metre (≈6.6 ft), or 3 Metre (≈9.8 ft) lengths to match your project.
Typical applications include aquarium pump inlet and outlet lines, automotive coolant and fuel transfer hoses, pneumatic air supply lines in workshops, garden irrigation connections, and industrial fluid transfer where a transparent hose makes flow monitoring easy. The clear wall lets you spot air locks, blockages, or discoloration at a glance — a practical advantage over opaque hose in any clear braided PVC hose for aquarium or pump application.
🔗
Compatibility: Fits standard barb fittings, hose clamps, and compression connectors. Match your fitting's OD to the hose ID. Sizes: 10mm, 13mm, 16mm, 19mm, 22mm, 25mm, 32mm, 38mm ID — select your size above.
⚠️
Size tip: The variant label shows ID × OD (e.g., 16mm × 21mm). Always match the Inner Diameter to your fitting's outer diameter. If unsure, measure your fitting OD with calipers before ordering.
✅ Key Features of These Wire Reinforced Clear Braided PVC Hose Pipes
-
🌀
Kink-Resistant Wire Braid — An embedded wire reinforcement layer keeps the bore open under tight bends and suction, preventing the collapse that plagues plain PVC tubing in pump inlet lines.
-
🔍
Crystal-Clear Wall — The transparent PVC construction lets you monitor flow, spot air locks, and detect blockages without disconnecting the line — especially useful in aquarium and fluid transfer setups.
-
📐
8 ID Sizes Available — From 10mm (≈3/8") to 38mm (≈1-1/2") inner diameter, covering a wide range of barb fittings and pipe connections for water, air, and light fuel applications.
-
✂️
Cut-to-Length Flexibility — Supplied in 1M, 2M, or 3M sections that cut cleanly with a utility knife, so you get exactly what your run requires without waste.
-
💧
Multi-Fluid Capable — Suitable for water, air, and light fuel or oil transfer. The flexible PVC material is generally resistant to common fluids encountered in garden, automotive, and workshop environments.
-
🔧
Easy Barb-Fitting Connection — Slides onto standard barb fittings and secures with a hose clamp for a leak-free seal. No special tools required — a practical choice for DIY plumbing and pneumatic air supply line repairs.
📐 Technical Specifications — Wire Reinforced Braided PVC Hose
| Material |
Clear flexible PVC with wire braid reinforcement |
| Inner Diameter (ID) Range |
10mm (≈3/8") — 38mm (≈1-1/2") — see variant options |
| Outer Diameter (OD) Range |
15mm (≈19/32") — 45mm (≈1-3/4") — see variant options |
| Wall Thickness |
Approximately 5mm (varies slightly by size) |
| Available Lengths |
1 Metre (≈3.3 ft) / 2 Metre (≈6.6 ft) / 3 Metre (≈9.8 ft) |
| Reinforcement |
Embedded wire braid layer |
| Transparency |
Clear / transparent |
| Flexibility |
Flexible — suitable for routing around bends |
| Typical Working Pressure |
Contact us to confirm for your specific size |
| Temperature Range |
Contact us to confirm |
| Typical Applications |
Water, air, light fuel/oil transfer; aquarium, automotive, pneumatic, garden |
| Fitting Compatibility |
Standard barb fittings + hose clamps (match fitting OD to hose ID) |
| Color |
Clear / transparent |
❓ Frequently Asked Questions
How do I choose the right hose size?
Match the Inner Diameter (ID) to your fitting or pipe's outer diameter. For example, a 1/2" (≈13mm) barb fitting typically pairs with the 13mm × 18mm hose. Always measure your fitting OD first, then select the ID that matches. The wall thickness on these hoses is generally around 5mm, so the OD will be approximately 5–7mm larger than the ID.
- 10mm ID ≈ 3/8" — suits small aquarium pumps and narrow fittings
- 13mm ID ≈ 1/2" — common garden and plumbing barb size
- 16mm ID ≈ 5/8" — typical for mid-range pump connections
- 19mm ID ≈ 3/4" — standard garden hose inner diameter
- 25mm ID ≈ 1" — common industrial and irrigation size
- 38mm ID ≈ 1-1/2" — larger pump and drainage applications
What pressure can this braided PVC hose handle?
Wire-reinforced braided PVC hose generally handles higher working pressures than plain PVC tubing. Typical working pressure for this style of hose is in the range of 6–10 bar (87–145 psi) depending on size and temperature, though exact ratings vary by diameter. For critical pressure applications, please contact us to confirm the specification for your chosen size.
Can this hose be used outdoors or in wet environments?
Clear PVC is generally moisture-resistant and suitable for wet environments. However, prolonged UV exposure can cause the material to yellow and become brittle over time. For permanent outdoor installations, consider UV-protective sleeving or routing the hose in a shaded area. For indoor, underground, or shaded outdoor use, this hose is typically well-suited.
Is this hose safe for fuel and chemical transfer?
This hose is commonly used for light fuel transfer (diesel, oil) and general fluid handling. PVC is generally resistant to many common chemicals, but compatibility depends on the specific fluid and concentration. For aggressive chemicals or gasoline, verify PVC compatibility with your fluid before use. Always confirm suitability for your specific application.
What fittings are compatible with this hose?
This hose is designed to work with standard barb fittings, hose clamps, and compression-style connectors. Select a barb fitting whose OD matches the hose ID. For example, the 16mm × 21mm hose (≈5/8" ID) typically fits a 5/8" barb fitting. Hose clamps are recommended for secure, leak-free connections, especially in pressurized systems.
How does the wire reinforcement help compared to plain PVC tubing?
The embedded wire braid adds structural support that resists kinking, collapsing under vacuum, and bursting under pressure. Plain PVC tubing can kink when bent or collapse when used on suction lines. The braided construction keeps the bore open under bending and suction, making it a more reliable choice for pump inlets, air lines, and pressurized water systems.
Can I cut this hose to a custom length?
Yes. Clear braided PVC hose can be cut cleanly with a sharp utility knife, pipe cutter, or fine-tooth saw. For the cleanest cut, score around the circumference first, then cut through. Deburr the cut end before fitting to ensure a good seal. We offer lengths of 1M, 2M, and 3M so you can order the closest length to your project needs.
🛒 Select your size (ID × OD) and length above, then add to cart — ships from our US warehouse.
