DIY TIPS

How to DIY an Efficient Plier Storage Rack Using PVC Tubing

This DIY project transforms PVC pipe scraps into a vertical storage rack for pliers using a simple cut, drill, and tie method. It is a low-cost, space-saving solution that keeps your workbench organized and tools easily accessible.

Author

Lilian

April 21, 2026

0 comments

Materials List

PVC Piping
Pipe Cutter
Power Drill
Bench Vise (for stability)
Black Nylon Cable Ties
Pliers to be organized

Step by Step

Step 1：Cutting and Preparation

Use a pipe cutter to slice the white PVC pipe into several segments of equal length (approximately 3–5 cm) to serve as fixed sleeves for the plier handles.

Step 2：Drilling for Fasteners

Secure a cut segment in the bench vise. Use a power drill to create a hole on two opposite sides of the pipe wall, ensuring the holes are large enough for a cable tie to pass through.

Step 3： Secure and Mount

Thread a nylon cable tie through the holes in the pipe segment and wrap it around a metal bracket, square tube, or support on your workbench. Pull the cable tie tight to fix the PVC sleeve to the support firmly.

Step 4: Tool Organization

Insert one handle of your pliers into the mounted PVC sleeve. You can install multiple sleeves side-by-side as needed to achieve organized storage for various pliers.

This DIY project is a fast, budget-friendly way to declutter your shop using PVC scraps. By simply cutting, drilling, and zipping, you create a custom vertical rack that keeps your pliers organized and always ready for work.