DIY TIPS

How to Turn Plastic Bottle Caps into a Heavy-Duty DIY Wall Mount?

Got empty plastic soda or water bottles heading for the recycling bin? Don't toss them out! With just a heat gun, a screw, and a wooden rod, you can repurpose plastic bottle caps into a sturdy, threaded wall-mounting bracket. Perfect for hanging clothes, tools, or towels in your workshop or closet.

How to make a DIY plastic bottle cap wall mount bracket

Author

IrisMo

July 31, 2026

0 comments

Materials List

Plastic bottle cap with the threaded bottle neck section
Wooden dowel or pipe rod
Heat gun
Screw & screwdriver
Utility knife

Finished plastic bottle cap wall rod hanging clothes hanger in workshop

Upcycled Threaded Wall Hook Hack

Step1: Prep the Bottleneck and Pole

Cut off the threaded neck of a plastic bottle with a utility knife, keeping a short plastic collar. Slide the collar onto the end of your wooden rod.

Step2: Heat-Shrink the Plastic

Apply heat evenly around the plastic collar using a heat gun . As the heat-shrinkable plastic tightens around the wooden rod, it forms a permanent threaded connector.

Step3: Mount the Cap to the Wall

Drive a screw straight through the center of the plastic bottle cap into your wooden wall or cabinet using a screwdriver .

Step4: Screw on the Pole and Use

Twist the threaded end of the rod directly into the wall-mounted cap clockwise until secure . Your solid, removable wall hanger is ready to hold clothes or tools !

It’s quick, eco-friendly, and cost-free! Grab an empty bottle from your bin and try building your own threaded wall storage today!